Filter by Brand
Top rated products
155 KG ICE CUBE MACHINE
Product Specifications:
- Cap: Store Capacity up to 65 Kg
- Cooler: Air Cooling System
- Power: Average power consumption 1400w
- Dim: 840x740x1075+(110+150)mm
- Brand: Brema
- Origin: Italy
155 KG ICE FLAKE MACHINE
Product Specifications:
- Cap: Store Capacity up to 40 Kg
- Cooler: Air Cooling System
- Power: Average power consumption 650w
- Dim: 738x690x920 mm
- Brand: Brema
- Origin: Italy
280 KG ICE FLAKE MACHINE
Product Specifications:
- Body: AISI 304 18/10 Stainless Steel
- Bin: Sold Separately
- Cooler: Air Cooling System
- Power: Average power consumption 1050w
- Dim: 560x569x695 mm
- Brand: Brema
- Origin: Italy
280 KG ICE FLAKE MACHINE
Price range: 0,00 د.إ through 5,61 د.إProduct Specifications:
- Body: AISI 304 18/10 Stainless Steel
- Bin: Sold Separately
- Cooler: Air Cooling System
- Power: Average power consumption 1050w
- Dim: 560x569x695 mm
- Brand: Brema
- Origin: Italy
400 KG ICE CUBE MAKER
Product Specifications:
- Body: AISI 304 18/10 Stainless Steel
- Bin: Sold Separately
- Cooler: Air Cooling System
- Power: Average power consumption 3000w
- Dim: 770X550X805 mm
- Brand: Brema
- Origin: Italy
44 KG ICE CUBE MACHINE
Product Specifications:
- Cap: Store Capacity up to 16 Kg
- Cooler: Air Cooling System
- Power: Average power consumption 450W
- Dim: 500x580x690 mm
- Brand: Brema
- Origin: Italy
C723 Soft Serve Freezer Twin Twist
Taylor C723 Specifications
Electrical
One dedicated electrical connection is required. See the Electrical chart for the proper electrical requirements. Manufactured to be permanently connected. Consult your local Taylor distributor for cord & receptacle specifications as local codes allow.
Beater Motor
Two, 1.0 HP.
Refrigeration System
One, 9,500 BTU/hr. R404A.
Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a. (BTUs may vary depending on compressor used.)
Air Cooled
Minimum 6” (152 mm) on both sides. It is recommended to place the rear of the unit against a wall, or allow 6” clearance (152 mm) at the rear. Optional air discharge chute directs heated air exhaust upwards; minimum clearance above top air discharge chute is 12” (305 mm). No clearance required on right side if air discharge chute is used.
Water Cooled
Water inlet and drain connections out rear panel 3/8” FPT.
